SRP9100 General Specifications

Frequency Bands

E0  66 - 88 MHz
AC 136 -174 MHz
KM  208 - 245MHz
R3  335 - 400 MHz
TU  400 - 480 MHz
UW 440 - 520 MHz

Channel Spacing

12.5, 20, 25kHz.
10kHz  Optional.

Modulation

Pre-emphasised FM

Power Requirements

NiCad Battery 7.2V 1600mAh
NiMH Battery 2100mAh 
NiMH Battery 2700mAh 
Li-Ion Battery 3000mAh 

Duty Cycle

>12 hours, high transmit power, 2700mAh battery, 90:5:5 duty cycle.

Operating Temperature

-30 to + 60 degrees centigrade

Antenna Connector

50 Ohm SMA (female plug)

Water and Dust Protection

IP54

Type Approval

EN 300086, EN 300113, EN300219, EN 301489, AS4295

Dimensions

147(H) x 68(W) x 46(D)mm 

Weight

 480g (with battery and antenna)

SRP9100 Transmitter Specifications

Output Power

0.5, 1, 2, 2.5, 4, 5W
2 power levels programmable. 

Audio Distortion

less than 3% @ 1000Hz, 60% dev

Audio Frequency Response

+1/-3dB of pre-emphasised
300Hz to 3000Hz on 25kHz Ch
300Hz to 2550Hz on 12.5kHz. 

Hum and Noise

>40dB (12.5kHz channel)
>45dB (25kHz channel) 

Transmitter On Time

less than 25mS

SRP9100 Receiver Specifications

Sensitivity

0.30uV for 12dB SINAD

Selectivity

>73dB (25kHz channel)
>65dB (12.5kHz channel) 

Intermodulation

>65dB (ETS method)

Audio Frequency Response

+1/-3dB of pre-emphasised
300Hz to 3000Hz on 25kHz Ch
300Hz to 2550Hz on 12.5kHz. 

Blocking

>95dB at +/- 1MHz

Hum and Noise

>40dB (12.5kHz channel)
>45dB (25kHz channel) 

Audio Output Power

500mW into 16 ohms

Audio Distortion

less than 5% at 500mW

SRP8000 General Specifications

Frequency Bands

66 - 88 MHz
138 -174 MHz
335 - 375 MHz
403 - 440 MHz
440 - 470 MHz

Channel Spacing

12.5, 20, 25kHz. 

Frequency Stability

2ppm

Modulation

Phase (speech); Frequency (data)

Power Requirements

NiCad Battery 7.2V 1600mAh
NiMH Battery 2100mAh 

Operating Temperature

-20 to + 55 degrees centigrade

Antenna Connector

50 Ohm SMA (female plug)

Water and Dust Protection

IP54

Type Approval

ETS300 086 Radio; ETS300-113 Data; ETS300 279 EMC; ETS300 219 Sig; AS4295-1995

Dimensions

147(H) x 68(W) x 46(D)mm 

Weight

 485g (with battery and antenna)

SRP8000 Transmitter Specifications

Output Power

Low: 1W High: 4-5W (band dependant)

Modulation Distortion

less than 5% @ 1000Hz, 60% dev

Modulation Response

+1/-3dB of pre-emphasised
300Hz to 2.55kHz on 12.5k channel. 

Hum and Noise

>40dB (12.5kHz channel) 

Transmitter On Time

less than 25mS

SRP8000 Receiver Specifications

Sensitivity

0.3uV for 12dB SINAD

Selectivity

>70dB (25k channel)
>60dB (12.5k channel) 

Intermodulation

>65dB (ETS method)

Spurious Response Attenuation

70dB

Audio Output Power

500mW into 8 ohms

Audio Distortion

less than 5% at 500mW

Standards and Conformance Marks

ETS300-086 Radio
ETS300-113 Data
ETS300-279 EMC
ETS300-219 Sig 

AS4295 Aust
 

European Conformance Mark

Australian Conformance Mark